How to Repair a Saab 93 Key Fob
There's a high possibility that the key fob of your Saab 9-3 is faulty with its electronic chip. The metal component of traditional car keys is easy to duplicate. Modern key-fobs, however, have an immobilizer to guard your vehicle.
The first step to determine the reason why your key fob isn't working is to replace the coin battery. This is a cheap and simple fix.
How do you program a Saab 93 Key Fob
Saab keys let you to control the trunk, doors, and engine of your car. They can also unlock your car's fuel doors and panic buttons. The remotes can be programmed by syncing them with the vehicle's radio transmitter. Put the key in the ignition and turn the switch ON. Follow the directions on the Tech2 until you have programmed all the keys you want to work with your vehicle.
Saabs are typically sold with only one key, despite the fact that they were originally designed to have two. You can get another key by re-installing the transmitter (which includes the transponder) and programming it in using a handheld computer known as a Tech-2 at your Saab dealer. You'll also need a new key that is compatible with the previous one in order to work. This can be a costly undertaking however it's much less expensive than replacing your entire CIM system with locking cylinders and in the event that you lose your only functioning key.
saab key programmer The Key Lab who have lost their only key should replace it with an additional one as soon a possible. The key fob is not like the classic metal keys used in cars a few years ago. It is an electronic device that communicates with the car via a special chip. This is how the car recognizes the key fob and also stops it from being copied. It is possible to do this at a dealer, however the cost can be high. This issue can be avoided when you purchase a new Saab key on the internet.
The main reason to have an additional key is to make your car more secure in the event that you should lose it. The criminal is more likely to locate a spare key rather than one that was stolen. Most thieves do not have the tools required to copy these modern keys. Even if they did have a specially designed machine, it will not be foolproof.
Another benefit of having an extra key is that it can save you money on replacing the battery in your SAAB 9-3 remote key. All electronic units within the key fob come with batteries and they will eventually fail. It is simple to replace the battery, but it is important to take care not to harm the electronics in the case. You can view videos on Youtube to learn how to complete this task, including the ones by Cyclone Cyd.
Saab 93 key fob battery
It's likely time to replace the battery on your key fob when you've noticed delays in response. A dead battery may be the cause of the delay. However there could be other causes. This is a low-cost and easy fix, so don't delay.
To remove the backup key, first remove the fob. To do this, press hard on the Saab logo and then pull on the key ring loop. Inject a flathead phillips screwdriver through the indentation in the key fob case. Turn the screwdriver around to separate the case. It shouldn't require much force, but be cautious not to scratch the plastic.
You can see the electronic components inside the case when you open it. The circuit board is connected to the retaining clips made of steel. If they're dirty or rusted, the fob won't work properly. You can clean them using rubbing alcohol. This is an interim solution. The clips will eventually wear out and need to replaced.
Before replacing the battery, it's important to check the car door locks using the backup remote. If it functions properly it's probably a problem with your primary key fob. Replacing your battery should solve the issue, but if you're experiencing delays when you lock or unlock your doors, it's possible that something else is wrong with your car.
Saab Key fob Case 93
If your key fob case is looking worn out an easy solution is to get a replacement. These are easily available online and can be fitted to your remote control. The only thing you'll require is a flathead screwdriver and some patience. Insert the flathead screwdriver in the slot at the middle of the case and then gently split it open. Be careful not to damage the limiters that hold the battery in place. After removal of the emergency key and badge, the new battery can be inserted into the existing electronics. There is no need to reprogramme the electronics.
The top key fob cover features a lining specifically designed to blocks signals from reaching the key fob. This is important since the signals are what allow your car to start. Some of these cases are constructed with silver layers, while others are made from copper to create more distortion in transmissions.
Key fob covers are also a great option to shield your keys from being damaged. It can help you keep track of your key fob and help you locate it in the dark on your way to your vehicle. Key fobs will help protect your keys from theft and add style to your keychain.